STEP 1
Turn the remote over and remove the battery cover with a small screw driver.
STEP 2
Remove the battery.
STEP 3
Press the left P2 button and hold it while re-inserting the battery.
STEP 4
Let go of the P2 button.
STEP 5
Replace the battery cover.
The remote now operates legacy motors. If you want to return to default mode, simply repeat the steps above.
Our legacy range of motors are as follows;
- Automate EL for internal roller shades,
- Automate FT for internal & external roller shades,
- Automate A50, A50c & A20c for awnings,
- Automate C for Curtain systems.